NIOSII board - Success / Week 13

Here is how I set the two ports.

Ethernet 0 (on board)
Your Ethernet MAC address is 00:07:ed:ff:75:4a
Static IP Address is 192.168.1.100

Ethernet 1 (daughter card)
Your Ethernet MAC address is 00:07:ed:24:8e:da
Static IP Address is 192.168.0.101

I tested both ethernet ports and I was able to get pings from both ethernet ports successfully.

Now I will add another daughter card to the board, so I will have three ethernet ports.
I added the daughter card to the SOPC builder so that both daughter cards share the same address and data pins. Then I have to set the pins for the upper daughter card and logic for irq also. In the code I change it so it will support 3 ethernet ports.